Tagged: Yamaha NS10

Ride The Pink Noise

We recently changed the placement set up for monitoring with our Yamaha NS10M Studio monitors. They were placed further away from the listening point and sound panels were placed at equal distances beside and behind the monitors. The idea was to get a wider stereo feel and to equalize the reflection surfaces around the speakers.

081

We do use other monitors during the mixing process but I like using the Yamahas for the initial mixing. For quite a while you couldn’t see a picture of a recording studio without seeing a pair of NS10s by the mixing console. Some people love them and some hate them. I like them but you have to know their strengths and weaknesses and use them accordingly. If you’re interested in more of their history, here’s an article from Sound On Sound that has a good discussion of their background:

http://www.soundonsound.com/reviews/yamaha-ns10-story

Since the placement was changed, that meant it was time to redo the room tuning for them. Ahhhh yes, the joy of a night of listening to pink noise. So I broke out the real time analyzer and got to work. Make sure that the mic for the analyzer is positioned in the spot where you’ll be sitting – near field monitors have a tight listening field and accuracy matters. The sound from pink noise will fluctuate, so you have to study the levels while it is running then review the peak capture when you turn it off. Here’s the running sound and peak capture when the EQ going in to the monitors is flat:

077

074

NS10Ms tend to be weak at the low end, so the EQ is adjusted accordingly. The process takes a while since when you adjust one frequency it effects the frequencies around it. The final EQ setting looks like this:

078

Here’s the running sound afterwards (remember running sound fluctuates, so a snap shot at a particular time will not look flat):

076

The final shot of the peak captures gives a good representation of where we ended up:

079

I’m pretty comfortable with the flatter EQ at the end of the process. One other tip is to make sure you are hearing equal levels from both speakers so you don’t overload one side when you’re mixing. The real time analyzer should let you get actual equal volumes for both sides. I have some volume hearing loss in one ear – the result of playing in bands for a lot of years (fortunately it is not frequency loss). To check on this take one channel of the song you’re mixing and run it straight down the center of your stereo field while sitting in your perfect center listening spot. If it sounds like it’s coming more from one channel or the other, make the adjustment on the volume of your reference amp. It’s at the end of the sound chain so it equalizes volume for your ears without effecting the balance in your actual mix. I also check the final mix of songs through the Real Time Analyzer so I’m using sight as well as sound to get the frequencies where I want them.

After the NS10 mixing is completed we’ll make any mix adjustments and also do the mastering through the higher end monitors set up in a different listening station. It’s always important to take your time, ‘put the mix down’ and come back to it later for review to get the best results possible. A great song will shine through no matter what, but a great mix will always improve your song.

And because I like to leave a little music for you……..

Father John Misty – “Ballad of The Dying Man”